Apriva BT200 User's Guide download pdf (Page 11)

Apriva

BT200-T Smart Card Reader for Intermec

CK61B/G Installation and User’s Guide

Powering on the Reader

When powered on, both LEDs illuminate while the reader performs a series of

startup tests. For LED startup descriptions, see Reader LED Startup

Indications on page 15.

To power the reader on or off:

Press the Power On/Off button on the top of the reader. If the reader will

not power on (the LEDs are not lit), try charging the battery as described

in Charging a Completely Discharged Reader Battery on page 15.

Installing the Reader Driver on the

Mobile Device

You must install the Apriva Reader driver on the mobile device before you can

pair the devices. See Pairing the Devices on page 7.

To upload the reader files to the mobile device:

1. If applicable, obtain the Apriva firmware and driver files from your system

administrator. For more information, contact Apriva Technical Support.

See Apriva Technical Support on page 29.

2. If you do not have one currently installed, download a data

synchronization program, such as Microsoft ActiveSync (for Windows

XP) or Windows Mobile Device Center (for Windows Vista or Windows

7). You can download the programs from the Microsoft website at:

http://www.microsoft.com/windowsmobile/en-us/downloads/default.mspx

3. Connect the mobile device to a computer as follows:

a. Make sure the power supply is attached to the mobile device

cradle, and then insert the mobile device in the cradle. Make sure

the mobile device is firmly set in the cradle. Loss of power during

synchronization might affect file transfers and updates.

b. Using the USB cable, connect the mobile device cradle to the

computer.

c. Power on the mobile device. The data synchronization program

should start, showing the user interface of the mobile device. If the

program does not start, make sure that the data synchronization

program is correctly installed and that the USB cable is

connected.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 36 37

No comments

Apriva BT200 User's Guide Page 11